Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coining, then it will be soaked in the lubricating oil in vacuum, it is porous structure, and oil impregnated. Advantage:1.Self-lubricating and maintenance-free2.Corrosion resistant and wear...

 Brief IntroductionOil pump stator is a basic component of oil pump, which co-work with the inner rotor or gear.We manufactured it by sintering (Powder metallurgy) technology.The advantages of PM stator are high efficiency, lower cost, more stable quality, because the sizes provide by mould.We do the finishing of two ends by korean lapping...

Shock absorber signal wheel is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface treatment. Technical information:1.    Material: MPIF 35 FC - 0205Equivalent material: DIN 30910 - Sint C102.    Chemical compositionDesignationFeCuCFC - 0205Balance1.5-3.9%0.3-0.6% 3.   ...

Shock absorber valve body is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface treatment. Technical information:1.    Material: MPIF 35 FC - 0205Equivalent material: DIN 30910 - Sint C102.    Chemical compositionDesignationFeCuCFC - 0205Balance1.5-3.9%0.3-0.6% 3.   ...

Shock absorber base valve is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface treatment.Technical information:1.    Material: MPIF 35 FC - 0205       Equivalent material: DIN 30910 - Sint C102.    Chemical compositionDesignationFeCuCFC - 0205Balance1.5-3.9%0.3-0.6%   ...

Shock absorber rod guide is made by powder pressing and sintering (Powder Metallurgy) technology.Some types will be inserted red PTFE DP4 sliding bushing in the inner diameter and do black steam oxidation depends on requirements. Technical information:1.    Material: MPIF 35 FC - 0205Equivalent material: DIN 30910 - Sint C102.    Chemical...

Spline Coupling,Website:http://www.dewin-powdermetallurgy.com,Air Compressor...

When we intend to change the machining process to PM,Website:http://www.dewin-powdermetallurgy.com, we need to consider 4 questions: 1.     The quantity is big enough to ensure the investment of mould is reasonable, because the machining maybe doesn’t need to make mould; 2.     Evaluate the structure and tolerance, to prove the...

 Brief Introduction of oil pump vane rotor The vane rotor is used for rotary vane pump,Website:http://www.dewin-powdermetallurgy.com, positive-displacement pump, which consists of the vanes, inner rotor and stator (Pump housing). We manufacture it by sintering (Powder Metallurgy) technology, the sizes are provided by mould, powder pressing at...

The gerotor is used for gerotor pump,Website:http://www.dewin-powdermetallurgy.com, postive displacement pump, also named gear pump, internal gear pump. It consists of the inner rotor and outer rotor. Inner rotor has X teeth, outer rotor has X+1 teeth.We manufacture it by sintering (Powder Metallurgy) technology, the sizes are provided by mould,...